More Tutorials 3 | How to Simulate a PMSM and Drive Using the FPGA-based Power Electronics Add-On (eHS)

Vous êtes ici : / More Tutorials 3 | How to Simulate a PMSM and Drive Using the FPGA-based...

Video Tutorials

NI VeriStand | More Tutorials

OPAL-RT’s FPGA-based Power Electronics Add-On (eHS) for NI VeriStand is a new tool designed to facilitate Hardware-in-the-Loop testing of controllers for power electronics applications. Learn to set up and install the Power Electronics Add-On onto your computer, license the software, and configure an electric motor and drive simulation.

Menu
3 videos
Video 1
How to Install the FPGA-based Power Electronics Add-On (eHS) for NI VeriStand Onto Your Computer (00:05:02)
Video 2
How to License the FPGA-based Power Electronics Add-On (eHS) for NI VeriStand (00:03:05)
Video 3
How to Simulate a PMSM and Drive Using the FPGA-based Power Electronics Add-On (eHS) (00:06:06)

How to Simulate a PMSM and Drive Using the FPGA-based Power Electronics Add-On (eHS)

Step 1: Configure the VeriStand Project (01:05)
Step 2: Configure the Circuit Model and PMSM (02:20)
Step 3: Deploy and Monitor the Simulation (04:44)
Suggested Content

Power Electronics Add-On for NI VeriStand User Documentation

Other recommended videos

OP103: Introduction to Power Electronics Real-Time Simulation with OPAL-RT Add-On for NI VeriStand
Introduction to NI VeriStand PE Add-On
OP205: Power Electronics Real-Time Simulation with eHS
System Requirements, System Documentation And Test Models
OP205: Power Electronics Real-Time Simulation with eHS
Circuit Model And Mapping With CPU Model
RT-LAB | More Tutorials
Connect your real time simulator to your host computer
RT-LAB | More Tutorials
Adding Visual Dashboard to your Real-Time Simulation
More Tutorials | 1 – Connect your real time simulator to your host co...More Tutorials 2 – How to License the FPGA-based Power Electronics Add-On...